Nick Green's role at Sonoran 3D Scanning
Nick Green is Vice President, Existing Conditions at Sonoran 3D Scanning. Existing conditions is the half of the business that measures buildings as they stand today: the laser scans on site and the as-built drawings and Revit models produced from them. He works with Duncan Schumacher, the company's CEO, and Andrew O'Neal, Vice President, Acquisitions. The full team is on the About Sonoran 3D Scanning page.
Existing conditions services in Phoenix
The existing conditions team scans commercial and industrial buildings with tripod-based terrestrial laser scanners and delivers:
- As-built drawings in Phoenix: floor plans, elevations, sections and detail drawings.
- Scan to BIM in Phoenix: Revit models of walls, floors, roofs, openings and visible systems.
- Scan to CAD in Phoenix: 2D AutoCAD drawings drafted from the point cloud.
- Point cloud services in Phoenix: registered and cleaned scans in E57, RCP/RCS and LAS.
- LiDAR scanning in Phoenix for large sites and outdoor structures.
From scan to deliverable
- Scope. The address, square footage, access, occupied or not, deliverables, formats and deadline are confirmed before fieldwork.
- Fieldwork. Scanners are set up at many positions inside and outside the building. Most commercial buildings take 1 to 3 days.
- Registration. All scan positions are aligned into one point cloud, then noise is removed.
- Drafting or modeling. CAD drawings or BIM models are produced from the point cloud, typically in 3 to 10 business days.
- Delivery and follow-up. Files go straight to the client, with support for extra measurements and reasonable revisions.
Deliverables, software and accuracy
| Deliverable | Formats | Opens in |
|---|---|---|
| Registered point cloud | E57, RCP/RCS, LAS | Autodesk ReCap, Revit, AutoCAD, CloudCompare |
| 2D as-built drawings | DWG, PDF | AutoCAD, any PDF reader |
| 3D BIM model | RVT | Autodesk Revit |
| Site photos | JPG | Any image viewer |
Scans are typically accurate to ±2 to 6 mm at typical working ranges. The deliverables are non-certified measurements for planning, design and documentation. For a permit or Certificate of Occupancy package, the client's architect or design professional seals and submits the drawings; the scan-based plans are the measured base they work from. Boundary and ALTA surveys go to an Arizona-registered land surveyor.
Projects the team is asked to scan
Typical requests Sonoran 3D Scanning has been asked to quote (anonymized, not completed case studies):
- As-built floor plans, ceiling heights, door and window sizes and rooftop units for a City of Phoenix Certificate of Occupancy submittal on an occupied 3-building site of about 7,300 sq ft, delivered in PDF, DWG and JPG.
- A 3D BIM model of 5 to 6 buildings totaling about 50,000 sq ft in Old Town Scottsdale.
- A high-density scan of part of an outdoor turf field in Phoenix, with a 5 mm accuracy target, delivered as a registered E57 point cloud.
Where the team scans
Phoenix and Maricopa County: Scottsdale, Tempe, Mesa, Chandler, Glendale, Gilbert, Peoria, Surprise and Avondale. Prescott, Flagstaff and Tucson are considered case by case.
Contact Nick Green's team
Sonoran 3D Scanning, 2942 N 24th St UNIT 114, Phoenix, AZ 85016. Phone (520) 800-5310, Monday to Friday, 8 AM to 5 PM. Request an as-built or scan to BIM quote with the address, square footage, deliverables and deadline; replies come within one business day.
Guides written by Nick Green
- As-Built Plans for a Certificate of Occupancy in Phoenix, AZ: A guide to the City of Phoenix Certificate of Occupancy paths for existing buildings, what the as-built floor plans must show, who seals them, and published fees and timelines, quoted from PDD documents checked November 2026.
- How Accurate Are Laser Scanned Floor Plans? Scan vs Drawing: How accurate floor plans drawn from a 3D laser scan really are: scan accuracy versus drawing accuracy, where error enters, tape measure versus laser scan arithmetic, and how to specify and check a plan.
- Laser Scanning in Extreme Heat: Planning 3D Scans in a Phoenix Summer: What a Phoenix summer does to 3D laser scanning: manufacturer operating temperatures vs NWS climate data, heat shimmer on long shots, roofs and parking lots, monsoon dust, battery and laptop heat, and dawn scheduling.
- LiDAR vs 3D Laser Scanning: Same Physics, Different Jobs: How LiDAR and 3D laser scanning differ in practice: platforms, published accuracy and point density, terrestrial vs mobile vs airborne, which one fits which project, and Phoenix constraints.
- Point Cloud File Formats: E57, LAS, RCP and When to Use Each: The main point cloud file formats (E57, RCP/RCS, LAS/LAZ, PTS/PTX, PLY, PCD) compared from their official specifications, with the software that opens each, conversion paths and what to ask a scanning provider for.
- Scan to BIM LOD: Level of Development for Existing Buildings: What level of development (LOD 200, 300, 350, 400, 500) means when a Revit model is built from a laser scan of an existing building, per the 2025 BIMForum LOD Specification, and how to specify it element by element.
- What Is 3D Laser Scanning? How Laser Scanners Measure Buildings: A plain definition of 3D laser scanning: how a scanner turns laser pulses into a point cloud, scanner types, published accuracy figures, what it is used for, and what it cannot see.
Frequently asked questions
Who is Nick Green?
Nick Green is Vice President, Existing Conditions at Sonoran 3D Scanning, a 3D laser scanning company in Phoenix, Arizona. He leads the scanning fieldwork and the as-built drawings, point clouds and BIM models made from it.
How accurate are the scans Nick Green's team delivers?
Typically ±2 to 6 mm at typical working ranges, depending on the scanner, range and conditions. Deliverables are non-certified measurements for planning, design and documentation, not licensed surveys.
Which file formats does the existing conditions team deliver?
Point clouds in E57, RCP/RCS and LAS, 2D drawings in DWG and PDF, 3D models in Revit RVT, and JPG site photos on request. Files are delivered directly, with no subscription viewer required.
How long does scanning and processing take?
Most commercial buildings take 1 to 3 days on site. Registration, cleaning and drafting or modeling typically take 3 to 10 business days after that. Rush delivery may be available at premium pricing.
Can the team scan an occupied building?
Yes. Scanning works around occupants, and after-hours or weekend scanning may be available at premium rates for operating businesses.
How do I reach Nick Green's team?
Call (520) 800-5310 Monday to Friday, 8 AM to 5 PM, or send a quote request with the address, square footage and deliverables you need.

